Hi everyone,
I am not able to obtain max prop rpm in the above aircraft. I have no such issues with all other planes, default, payware or freeware in my FSX fleet. I have tried all solutions, I can think of, but nothing works, even though it did up until a few days ago. I am not sure what I did to foul things up...
I am wondering if it is a power scaler issue or something else, perhaps within standard.xml. Here is my Power scaler entry in aircraft.cfg
[piston_engine]
power_scalar = 0.946 //adjustment to 1200 HP //Piston power scalar
cylinder_displacement= 130.71 //Cubic inches per cylinder
compression_ratio= 6.7 //Compression ratio
number_of_cylinders=14 //Number of cylinders
max_rated_rpm= 2685 //2700 reduced to not exceed //Max rated RPM
max_rated_hp= 1200 //Max rated HP
fuel_metering_type= 1 //0=Fuel Injected, 1=Gravity Carburetor, 2=Aerobatic Carburetor
cooling_type= 0 //0=Cooling type Air, 1=Cooling type Liquid
normalized_starter_torque= 0.55 //Secured Engine Start
turbocharged= 1 //Is it turbocharged? 0=FALSE, 1=TRUE
max_design_mp= 48 //Max design manifold pressure, (inHg)
min_design_mp= 10.0 //Min design manifold pressure, (inHg)
critical_altitude= 100 //7000 reduced to match 1" decrease per 1000 ft still matching MAPs at critical altitudes //Altitude to which the turbocharger will provide max design manifold pressure (feet)
emergency_boost_type= 0 //0=None, 1=Water Injection, 2=Methanol/Water injection, 3=War Emergency Power
emergency_boost_mp_offset= 0 //Additional manifold pressure supplied by emergency boost
emergency_boost_gain_offset= 0 //Multiplier on manifold pressure due to emergency boost
fuel_air_auto_mixture= 0 //Automixture available? 0=FALSE, 1=TRUE
auto_ignition= 0 //Auto-Ignition available? 0=FALSE, 1=TRUE
max_rpm_mechanical_efficiency_scalar= 1.0 //Scalar on maximum RPM mechanical efficiency
idle_rpm_mechanical_efficiency_scalar= 1.0 //Scalar on idle RPM mechanical efficiency
max_rpm_friction_scalar= 1.0 //Scalar on maximum RPM friction
idle_rpm_friction_scalar= 1.0 //Scalar on idle RPM friction
magneto_order_left_right_both = 1 //sets the order of the magneto switch direction
any help is appreciated. If I need to do a reinstallation of the aircraft, so be it...thanks
Sherm
Bookmarks