Ant's Tecnam is now 2.0.
Ant's Tecnam is now 2.0.
VRS TacPack version 1.4.3.4 is available.
Support for P3D hotfix 3.
Dave
Captain Sim's Boeing 777 has been updated to version 1.8
I just received a notice from Justflight for a Service Pack on their DeHavilland Mosquito.
What's new in this release?
SP1 • Sound set replaced.
• Propeller effect improved.
• Engine Idle RPM corrected.
• Navigation lights effects adjusted.
• Paint kits layers issues addressed.
I can assume that it is a full install, which means that I would have to uninstall my current version before installing the Service Pack.
Can anyone confirm??
-- WH
If at first you don't succeed, try, try,try again. ... or go read the manual.
That's correctI can assume that it is a full install, which means that I would have to uninstall my current version before installing the Service Pack.
Can anyone confirm??
Martyn
Just Flight Development Manager
http://www.antsairplanes.com/NEWS > SIERRA LSA V2.10 PATCH (Feb 2017)
There is a new patch available for the Sierra. This patch will
fix a problem the cold and dark setting causing problems with engine starting.
It also adds the option to always load the Sierra in a cold and dark state when
the aircraft is loaded on the ground. Also fixes a texture issue with the dirt
effect plus it fixes some typo errors.
The patch works for the payware
and demo versions of the Sierra V2.00 only (the patch requires version 2.00 be
installed first).
The demo model has now been updated to the latest
version. The full payware version will be updated shortly but for now you need
to download the patch to be completely up to date.
-Mark
http://www.a2asimulations.com/downlo...e_03_15_17.zip
This one A2A Update detects and updates our entire fleet of Accu-Sim aircraft.
AIRCRAFT INCLUDED
- B377 “Stratocruiser” (original release)
- B377 “Captain of the Ship”
- Piper J3 “Cub”
- P-47 “Razorback”
- B-17 “Flying Fortress”
- Supermarine “Spitfire”
- P-40 “Warhawk”
- P-51 “Military” Mustang
- P-51 “Civilian” Mustang
- C172 “Trainer”
- Piper Cherokee "180"
- C182 "Skylane"
- Piper 'Comanche" 250
- North American T-6 "Texan"
- Captain of the Ship Lockheed L049 "Constellation"
1/17/2017 - 3/15/2017 CHANGES:
Captain of the Ship L-049 "Constellation"
- 2D controls: Carburetor air flaps control works in 0-100 range
- Input configurator - linear trim axes response
- Engine 1 oil temperature initialization issue fixed
- Oil viscosity system added
- Air conditioning now runs off compressors attached to engines 1 and 4
- Fuel Xfeed corrected
- Engine fuel line capacity increased
- Captain's cruise announcement won't occur in heavy or severe turbulence
- Contact points adjusted
- 3D model gaps next to rudder pedals sealed
- Controls lock depends on engines hydraulic pressure (RPM)
- Nav lights "Squares" fixed
- DME gauges has got a tooltip.
- 2D map displays distance data
- Rudder trim tabs animation reversed
- CoPilot's magnetic bearing gauge FROM/TO needle fixed
- Landing gear animation corrected
- Transponder Alt switch animation reversed
- Autopilot pitch shortcut reversed and made less coarse
- Upper and lower cowl flaps tooltips corrected
- Max RPM and Min RPM key shortcuts inverted
- Co-pilot's altimeter pressure dial animates
- 2D Map. Blue wind arrow inverted to show wind direction
-Mark
FTX Vector was updated:
http://www.orbxsystems.com/forum/top...151-available/ .
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Some users reported broken AEC function after the update. Please check this post : http://www.orbxsystems.com/forum/topic/132275-ftx-vector-151-available/#comment-1175850
Windows 10 x64, Z170A Gaming Pro Mobo, i7-6700K CPU (no O/C), 32 Gb DDR4 RAM, RTX3060 12Gb, P3D v5 latest edition, mesh Toposim, packs ORBX FTX Global Base + Vector + OpenLC, + Trees HD, ASP3D, ASCA, P3D v6 latest edition, mesh Toposim + TEP, X-Plane 12, simHeaven X-World, M2XP Antarctica
DC-8 Jetliner Series 10 to 40 service pack 4 is now available - http://www.justflight.com/support/dc-8-jetliner/58c0621
Change list:
- Autopilot re-coded for improved usability
- Fuel system re-coded for improved usability (refer to manual for more information)
- Manual PDF updated to reflect changes to software since release
- New ADI/HSI added
- Hydraulic brake pressure gauge needle disappears at night - FIXED
- More viewpoints added, virtual cockpit viewpoints improved
- Right emergency bus fail light illuminates with #4 generator off - FIXED
- Altitude alerter value now increments in 100ft steps for improved usability
- 21000/22000ft markings missing from altimeter - FIXED
- Outside air temperature gauge not lit at night - FIXED
- Mach meter gauge not lit at night - FIXED
- First-officer mach meter not working - FIXED
- Weather radar display missing on DC-8-12 variant - FIXED
- Fuel gauge texture issues at night - FIXED
- Exhaust gas temperature (EGT) gauges stuck at zero value - FIXED
- RMI needles reversed - FIXED
- EPR bugs missing - FIXED
- Hour hand on clock not working - FIXED
- VOR selection switch on First-officer HSI not animated - FIXED
- Flap position indicator needle going off-scale with electrical power removed - FIXED
- DME indication windows - FIXED
- DC-8-12 variant appearing too small in preview window - FIXED
- Barometric pressure setting on altimeter showing fractional value - FIXED
- Radio altimeter has no upper limit - FIXED
- Fuel temperature selector clickspot logic - FIXED
- Smoke detector selector clickspot logic - FIXED
- Voltage & frequency selector clickspot logic - FIXED
- Battery/external power switch clickspot logic - FIXED
- DC-8-32 SAS has multiple entries in aircraft.cfg - FIXED
- Yaw damper not working - FIXED
- No fuel flow when starting engines - FIXED
- Air start interlock simulated. Engines are started with external power or with cross-bleed if at least one engine is already started.
- Landing light switch logic improved
- Discrepency between RMIs - FIXED
- Auxillary hydraulic pump not generating pressure - FIXED
- Navigator's altimeter missing barometric setting - FIXED
Martyn
Just Flight Development Manager
Saw this on Aeroplane Heavens FB page, about an upgrade for the B17F package. It will be free for existing owners. Up until April 10th.
"
A FREE B17 FROM AEROPLANE HEAVEN!!
We are delighted to announce the forthcoming release of a significant upgrade to our B17F package. Two new models of the B17G (early and late models) have been added to the fleet.
If you already own the B17F package you get the whole new pack for free - just download from your purchase point when the upgrade is available.
If you don't yet own it and if you purchase at the current price before Monday 10th April you too can enjoy the B17G upgrade for free.
+7
Problem is, I just went to JF to download this and its still the same installer from 2015. Have sent a message to JF to find out when it will be available, still waiting to hear back.
The update is very confusing. We discussed it in this thread. See post #207.
I assume it will not be available until after Monday the 10th, and maybe later based on where you purchased it. When it was first released the link wasn't working as I recall, so I ended up purchasing mine from PCAviator. PCAviator tends to lag behind any updates so when it will be available is anyone's guess.
-- WH
If at first you don't succeed, try, try,try again. ... or go read the manual.
This was highlighted in the B17F thread a few days ago. There's no hurry on it. Just download it from your vendor when it's available (if you already own it) and if you don't already own it, if you buy the B17F before April 10th, you'll get the upgrade for free.
You started by saying that it's free for existing customers up to 10th April and that's not what the announcement actually says
ATB
DaveB
This one A2A Update detects and updates our entire fleet of Accu-Sim aircraft.
DOWNLOAD
http://www.a2asimulations.com/downloads ... _13_17.zip
3/15/2017 - 4/13/2017 CHANGES:
T-6:
- Fixed artificial horizon knob, fixed altimeter knob in rear cockpit
- Fixed VOR gauge, the needle no longer track GPS flightplan if GPS is turned off
- Made a change that hopefully resolved a looping NAV switch sound bug on some machines
P-40:
- Added some missing sounds that may cause a CTD upon landing
- Emergency hydraulic circuit fixed (need to open emergency valve on lower left cockpit floor)
- When on jacks with battery turned on, inertia wheel no longer winds up
Spitfire:
- Added some missing sounds that may cause a CTD upon landing
-Mark
HS 748 Service Pack 2 is now available - https://www.justflight.com/support/hs-748/fd766f3
Changes include:
- Various texture fixes (including to mapping)
- Various improvements to FDE
- Missing livery descriptions added
- Windscreen wiper animations different on Captain and First Officer sides - fixed
- Panel light switch not animated - fixed
- Airframe de-ice gauge bezel not attached to panel - fixed
- Missing port nav light - fixed
- Overnight night lighting issues - fixed
- Airspeed indicator replaced for increased realism
- Autopilot struggling to track glideslope - fixed
- Auxiliary pumps spelling error - fixed
- Shadow issues - fixed
Martyn
Just Flight Development Manager
Meteor F.8/FR.9 Service Pack 2 is now available - http://www.justflight.com/support/me...8-fr-9/63d918c
Changes include:
- Canopy railing gaps removed
- Rudder trim animation and control direction - fixed
- Stall sound added
- HP/LP cocks - now initialised correctly when the aircraft is first loaded and when autostart (Ctrl+E) is used. Mouse-wheel operation added for improved usability.
- EGT disparity between engines 1 and 2 - fixed
- Intermittent electrical failures - fixed
- Navigation hold switch added to autopilot
- Red cockpit flood light added (switch above Machmeter)
- VOR needle colour changed for improved visibility at night
- Flap sound volume increased
Martyn
Just Flight Development Manager
ORBX is having a sale:
https://orbxdirect.com/
Just had an email from the Flightsim Store notifying me that v 3.3 of Steve's DX10 Fixer is available.
More info here: -
https://stevesfsxanalysis.wordpress....0/version-3-3/
Cheers
Paul
SYSTEM :
OS:Win7 Home Premium 64 bit UAC OFF!
DX version Dx10 with Steve's Fixer.
Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
Motherboard:Z87
RAM:16 gig 1866 gigaHz Corsair ram
Video Card:MSI 1070 8 gig ram
HD:2Tb Samsung 850 evo SSD
To err is human; to forgive is divine
Aerosoft PBY Catalina updated to 1.22:
- Added P3Dv4 support
http://forum.aerosoft.com/index.php?...0updated-v122/
Aerosoft Twin Otter Extetended updated to 1.21:
- Added P3Dv4 support
http://forum.aerosoft.com/index.php?...pdated-to-121/
Flavio - P3D v4.5 - MSFS 2020 - Win 11 Pro 64
i912900KF 5.2ghz - ASUS TUFZ690 - AIO Cooler Master PL360 Flux Masterliquid - 32gb Kingston Fury 3600mhz - Asus RTX 2080 Super - AGON 32'' AG323FCXE 165mhz - MCP 737R 2015 Virtual Avionics - SSDs M2 2Tb+1Tb XPG
Ant's CAC Winjeel is updated. V1.3 is out. What a great plane!
Cees
Released...
https://www.justflight.com/support/c46-commando/c3a4681
What is new in this update?
Changes include:
- FDE improvements
- ASI - TAS scale fixed
- Interior/exterior lighting - fixed
- USAF China Doll livery - red stripes removed from roundel on wing
- Engine start controls/process improved - mesh switch no longer single-use
- Cold & dark switch labels added to overhead panel
- Yokes are now hideable - click spots located on cockpit torches
- Captain's instrument panel overlap issues - fixed
- Instrument panel gaps fixed
- Various tooltips fixed
- Cockpit hoses fixed
- Fuel gauges not displaying accurate quantities - fixed
- Military cockpit VSI underreading - fixed
- Radio issues - fixed
- Instrument/beacon light switch labels - fixed
- Various livery fixes
-Mark
Bookmarks