Prepping for the Mooney Pilots...
Results 1 to 21 of 21

Thread: Prepping for the Mooney Pilots...

  1. #1
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330

    Prepping for the Mooney Pilots...

    Hey all,

    Project nearing completion.

    Some heads up on the performances of this new plane. The Mooney series has come a long ways since the Bravo. The new version, high end model is the Acclaim. Bravo was the older version from years ago. The new Acclaim has many updates and refinements to aerodynamics and power. The new version of this aircraft line will cruise at 234 Knots KTAS and peaks at 243 Knots KTAS. Its a fast bird.

    The hard part about flying this plane is the lift change as it speeds up. You will need to start trimming down as you speed up. At higher end speeds, you will have trimmed a moderate amount to keep her level. At slower speeds, like entering traffic at 120 Knots, you will have alot of 'up' trim as she is better at flying faster.

    The Aux. ASI gauge has some dots on it for annunciating speeds. The graphics will show you what you need to know.

    Unfortunately, I couldnt not change out the color strips on the PFD screen in the speed zones (colored lines on the vertical speed tape). I have asked Lockheed if they can see about changing it to the new airspeeds.


    Some data on the new model's performance.....


    Top Speed 242 ktas
    Rate of Climb at sea level (max. wt.) 1,240 fpm
    Long Range – Std. Fuel (with res.) 1,445 nm
    Long Range – Optional Tanks (with res.) 1,852 nm
    Max. Operating Altitude 25,000 ft
    Take-off Run at sea level (max. wt.) 1,620 ft
    Engine TCM TSI0-550-G-Turbo-Supercharaged
    Twin turbo Dual intercoolers
    Horsepower 280 bhp
    TBO 2,000 hrs
    Propeller Hartzell Three-Blade
    Fuel Capacity – Standard (usable) 100 usg
    Fuel Capacity With Optional Tanks (usable) 128 usg
    Gross Weight 3,368 lb
    Approx. Useful Load 1,000 lb
    Wing Span 36' 1"
    Tail Height 8' 6"
    Length 26' 8"
    Wing Loading 19.2 lbs/sq ft
    Power Loading 12.0 lbs/hp
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  2. #2
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Variants so far that should be in the package.

    Paint kit will be available.
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  3. #3
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    There are two colors of cockpits; tan and brown and light/dark gray. Both in leather.

    Sebastian at FSDeveloper has designed a very cool 'TextureSwitch' program which will convert the 'regular' default textures over to 'high resolution' textures. If the textures are too hard on the computer, or the pilot wishes to fly online and needs more ram, then you click the program again, select 'Load Regular Resolution Textures' and Voila, back to 1024 texture sizes.

    All textures are 1024 by default except the fuselage texture. Only 7 textures are converted to high rez (per plane) which includes the bump maps for fuselage and wings so the rivets and bits are much more clear and precise.




    All of that, and she is fun to fly.


    NOTE: On performance chart above, this plane has the standard 50 Gal. tanks; 100 total.
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  4. #4
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    And of course... There is Philicia, the Mooney babe.... :mixedsmi:
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  5. #5
    SOH Staff .."Bartender" AussieMan's Avatar
    Join Date
    Jun 2005
    Location
    Woy Woy, NSW, Australia Zulu +11 AEDST
    Age
    77
    Posts
    3,593
    Can't wait to get my hands on this one.


    Cheers
    Pat


    "Some people might say that freedom is being alone in the bush with the only sounds being the murmurs from the birds ... but I believe freedom is at 5000 feet with no other sound than the engine roaring."- William Hutchison, a young man taken from us far too young (16).

  6. #6
    The Mooney or Philicia?
    Matt

  7. #7
    SOH-CM-2021 nio's Avatar
    Join Date
    Sep 2005
    Location
    Biggin Hill,England
    Age
    67
    Posts
    330
    As altruists go, you are up there with the best ,Bill.

    I am sure that the guys at LM are absolutely delighted with what you have achieved and , rightly so.

    best

    nio

    :ernae:

  8. #8
    Quote Originally Posted by aeronca1 View Post
    The Mooney or Philicia?
    Why choose?

  9. #9
    SOH Staff .."Bartender" AussieMan's Avatar
    Join Date
    Jun 2005
    Location
    Woy Woy, NSW, Australia Zulu +11 AEDST
    Age
    77
    Posts
    3,593
    Quote Originally Posted by aeronca1 View Post
    The Mooney or Philicia?
    I'm not greedy ....... BOTH


    Cheers
    Pat


    "Some people might say that freedom is being alone in the bush with the only sounds being the murmurs from the birds ... but I believe freedom is at 5000 feet with no other sound than the engine roaring."- William Hutchison, a young man taken from us far too young (16).

  10. #10
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Quote Originally Posted by aeronca1 View Post
    The Mooney or Philicia?

    LOLOL.....! She is a cutie.

    nio
    As altruists go, you are up there with the best ,Bill.

    I am sure that the guys at LM are absolutely delighted with what you have achieved and , rightly so.

    best

    nio
    A thousand thanks Nio. I am still just a humble poly bender...

    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  11. #11
    Just as a heads up, Bill. The fruit "Plum" as well as the color "Plum" has no "b" in it...

    "Plumb" is a verb; it is what plumbers do for a living...


    Really lovely liveries though!
    Bill Leaming
    3d Modeler Max/GMax
    C & XML Gauge Programmer

    Military Visualizations
    http://milviz.com

    Intel® Core™ i7-3770k 4.2GHz - Crucial 16GB DDR3 - Dual Radeon HD770 1GB DDR5 (Crossfire) - Eco II Watercooling - Win7 64bit
    Intel® Core™ i7-2600k 3.4GHz - Crucial 8GB DDR3 - NVIDIA EVGA GTX-770 SC 4GB - Win7 64bit

  12. #12
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Thanks Bill for the heads up. Will edit momentarily.



    Bill
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  13. #13
    Bill, did you ever get a chance to try out the env and fresnel textures I sent you for the Mooney? If done right, they should make it look even better than it already does! (Is that even possible? )


  14. #14
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Quote Originally Posted by Hughes-MDflyer4 View Post
    Bill, did you ever get a chance to try out the env and fresnel textures I sent you for the Mooney? If done right, they should make it look even better than it already does! (Is that even possible? )

    I didnt! My apologies.

    The plane has already been submitted. Hopefully released soon and we can experiment with that.

    All things can be improved. The plight for perfection....
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  15. #15
    I'm sure this will be, as usual, "better than the best" from you, Bill. Haven't had a complaint, yet. Not a real one, anyway.

    I want Philicia to be in the right seat, too!
    Don H

    AMD Ryzen 5 7600X
    MSI MAG B650 Tomahawk WIFI/BT
    64GB Corsair Vengeance 6000MHz DDR5 C40 (4x16)
    Sapphire Pulse AMD Radeon RX7900XT 20GB DDR6
    Corsair 5000D Airflow Case
    Corsair RM850x 80+ GOLD P/S
    Liquid Freezer II 360 water cooling
    C:/ WD Black 4TB SN770 Gen 4 NVMe M.2 SSD
    D:/ Crucial P3 PLUS 4TB Gen 4 NVMe M.2 SSD
    Samsung 32" Curved Monitor
    Honeycomb and Saitek Flight Equipment

  16. #16
    Quote Originally Posted by Lionheart View Post
    I didnt! My apologies.

    The plane has already been submitted. Hopefully released soon and we can experiment with that.

    All things can be improved. The plight for perfection....
    No worries! I was just curious. All I can say though is great job! The plane looks fantastic and I can't wait to fly it in the sim some day. I'm sure I won't be disappointed.


  17. #17
    Just wondering but do you think she will also fly in FSX? I am only wondering because i have yet to make the move due to some issues on some things with my PC. Non the less, beautiful work Bill!!! Thank you for what you have done!
    "If three-holers are gas guzzlers, why are there four-holers now???"
    "But what do i know? I'm just the 800 pound guerrilla in the room."

    Fire! Fire! Your pants better not be on fire....

  18. #18
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Hey Cag40Navy,


    I dont know. Its using the garmins from P3 that go through their sim-connect. It might, it might not.

    Roger said a couple of things didnt work right in FSX. The same things for me in P3 'did' work, so that might be a barrier with FSX.


    Bill
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  19. #19
    where do i find this sexy plane is it out yet?

  20. #20
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Hey Shane,

    Very soon. It will come with the update to P3D. We just got permission to use the newest Mooney Acclaim, legal permissions were required. Should be very soon now.


    Bill
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  21. #21
    wow that's like two presents in one Christmas coming early this year

Members who have read this thread: 31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •