RAZBAM A-7 Corsair II Volume III (trainer variants) released!

**doublecool** · April 9th, 2011, 16:01

Dillingham was the test area... Attachment 34847

I drop one as a test and then well I had to take out the runway, then the building had alot more but I trashed the engine

This is Brilliant RAZBAM

**res non verba** · April 9th, 2011, 16:18

Originally Posted by ZEUS67

Is your problem solved?

Flying and kicking!!! :salute:

Thanks for another exellent aircraft!!! :ernae:

the patch to activate the module had put everything i have in my dll in just one line, corrected and solved.

i downloaded the cirrus dll and seems he don't have the module activated.

my issues:
-flight path marker in the hud 6º up (seems that EA-7L is the only correct)
-radio freq indication in the main panel missing (seems here too EA-7L is the only correct)
Attachment 34848 Attachment 34849 Attachment 34850 Attachment 34851

**dvj** · April 9th, 2011, 17:46

WOW! And I'm not even gotten off the ground yet! :salute:

Attachment 34858

**ZEUS67** · April 9th, 2011, 17:58

Originally Posted by dvj

WOW! And I'm not even gotten off the ground yet! :salute:

Attachment 34858

That is one beautiful image, worthy of a poster.

**Prowler1111** · April 9th, 2011, 19:39

Originally Posted by doublecool

I'll look at that

here is something...it looks like a missing texture

it looks like the EA-7L and TA-7H and the P and H models in the TA-7 C :salute:Attachment 34837 Attachment 34838

I love the twin seat...models
the rounded cockpit and canopy

I was tryin to show that in my other Screen shots

Sorry. i´m back
No it´s not a missing texture, EA-7L´s had a tail end cover, i´ve been trying to figure out why (even as it was implemented in some TA-7C´s), looping over the internet i found an obscure plastic models forums (in Russian mind you, viva babelfish!)where they stated that it was used in this particular variant to minimize radar cross section...don´t know if that makes sense at all, but it does sound like a valid answer to me, given the function of these aircraft.
Best regards
Prowler

**Prowler1111** · April 9th, 2011, 19:43

Originally Posted by res non verba

Flying and kicking!!! :salute:

Thanks for another exellent aircraft!!! :ernae:

the patch to activate the module had put everything i have in my dll in just one line, corrected and solved.

i downloaded the cirrus dll and seems he don't have the module activated.

my issues:
-flight path marker in the hud 6º up (seems that EA-7L is the only correct)
-radio freq indication in the main panel missing (seems here too EA-7L is the only correct)
Attachment 34848 Attachment 34849 Attachment 34850 Attachment 34851

We´ll look into that..thanks
It was a very confusing package to assemble, we might have overlook something (after the gazillion times we tested)but i´m used to multiple variants of the same aircraft, but these....these were extremely confusing, one variant with the other with minimal differences in an overall similar look..
Best regards
Prowler

**Prowler1111** · April 9th, 2011, 19:44

Originally Posted by dvj

WOW! And I'm not even gotten off the ground yet! :salute:

Attachment 34858

Awesome pic!..did you shoot that toy you have hanging there?

Prowler

**Prowler1111** · April 9th, 2011, 19:48

Originally Posted by doublecool

Another texture may be missing :salute: Attachment 34839 you can see the engine when looking from the rear some of the models you can't

This is a great paint...Very Dark yet you can still see all the details

Hi again, nope it´s there, just pretty much obscure, don´t blame me, blame the USAF!, lol..
Prowler

**ZsoltB** · April 9th, 2011, 20:12

The rear seat of the head movement is very slow :mixedsmi:
Can this be improved?

**ZEUS67** · April 9th, 2011, 20:31

Originally Posted by zsoltquack

The rear seat of the head movement is very slow :mixedsmi:
Can this be improved?

We tried, but it is a function of FSX. It starts slow but as long as you have the head moving it picks up speed.

**Prowler1111** · April 9th, 2011, 20:34

Also, if you open the aircraft cfg, at the eye view points, you´ll see a // separated entry, that´s for the instructor´s office, all you have to do is // the first entry (pilot´s)
WARNING, this will put you in the back office with no ways to come back to the front office unless you edit the entry again.
Best regards
Prowler

**Z-IanMCD** · April 9th, 2011, 22:50

Originally Posted by doublecool

Dillingham was the test area... Attachment 34847

I drop one as a test and then well I had to take out the runway, then the building had alot more but I trashed the engine

This is Brilliant RAZBAM

Hmmmm, time for a wee bit of **** and some testing over Tripoli!!

**ZsoltB** · April 9th, 2011, 23:36

Originally Posted by Prowler1111

Also, if you open the aircraft cfg, at the eye view points, you´ll see a // separated entry, that´s for the instructor´s office, all you have to do is // the first entry (pilot´s)
WARNING, this will put you in the back office with no ways to come back to the front office unless you edit the entry again.
Best regards
Prowler

Hello Prowler,

Thank you! :salute:

Available for FSX Firing range?

Regards,

Zsolt

**doublecool** · April 9th, 2011, 23:56

Originally Posted by Prowler1111

Hi again, nope it´s there, just pretty much obscure, don´t blame me, blame the USAF!, lol..
Prowler

Hi Prowler, Congratulation, really really Wonderful Job on the Volume III

sorry for that, The photo I posted shows the engine others do not I attach two of your different parts.textures just to verify Attachment 34868 Attachment 34869

**Fireball6** · April 10th, 2011, 06:43

I am one more of the guys without luck - try it 3 times but was not able to download - email is send, so i hope to get her later today .......

***ColoKent*** · April 10th, 2011, 07:43

....try turning off your firewall, and turning off your pop-up blocker

Kent

P.S. Remember to turn them back on after you are done...

**Fireball6** · April 10th, 2011, 07:55

Hi Colokent - i did, without luck - at the third try, the download-message appears, but nothing more - no download start - but it was counted and my 3 Downloads are gone ....
Maybe it is a Server-Problem - to many people want the Two-Seater ( I am also - but now I am sit and wait that the Download-Counter will be reset by the RAZBAM-Crew).
I try it once with IE and once with FireFox - the Download stopp at 186 MB, finished and i have a corrupted zip-file.

Greetings

Dirk

**Fireball6** · April 10th, 2011, 08:53

Got it - thanks to Zeus67 for his great support - now i am offline - installing and testing......

Dirk

**hae5904** · April 11th, 2011, 02:35

Originally Posted by Prowler1111

Sorry. i´m back
No it´s not a missing texture, EA-7L´s had a tail end cover, i´ve been trying to figure out why (even as it was implemented in some TA-7C´s), looping over the internet i found an obscure plastic models forums (in Russian mind you, viva babelfish!)where they stated that it was used in this particular variant to minimize radar cross section...don´t know if that makes sense at all, but it does sound like a valid answer to me, given the function of these aircraft.
Best regards
Prowler

Maybe the following pictures will solve the issue!! It's only used on the TA-7C and as the EA-7L were modified from existing TA's......:

.

Cheers,
Hank

**Montie** · April 11th, 2011, 04:58

Finally bought Volume 3 today, but the download stopped twice and the third try was not available? Sent a request for download-reset over the store support.

**ZsoltB** · April 11th, 2011, 06:37

Can be solved in that the volume 1 A-7, bombs can be effect?
Sound and smoke and fire effects as the volume 3

**Prowler1111** · April 11th, 2011, 06:47

Originally Posted by zsoltquack

Can be solved in that the volume 1 A-7, bombs can be effect?
Sound and smoke and fire effects as the volume 3

All previous A-7 volumes will be updated to Vol3 standards (just the ASCU, and a .dll)
Best regards
Prowler

**UnknownGuest12** · April 11th, 2011, 08:23

<TABLE border=0 cellSpacing=0 cellPadding=0><TBODY><TR><TD>
Just want you to know what happened when I acessed this site....Got this from NIS 2011, strange Ignored it and was ok
Regards

"Malicious Web Site Blocked

</TD></TR><TR><TD width=647>
You attempted to access:
http://www.razbam.org/store/catalog/...products_id=79

This is a known malicious web site. It is recommended that you do NOT visit this site. The detailed report explains the security risks on this site.

For your protection, this web site has been blocked. Visit Symantec to learn more about phishing and internet security. "

</TD></TR></TBODY></TABLE>

**ZEUS67** · April 11th, 2011, 08:33

Originally Posted by Beaufighter

<table border="0" cellpadding="0" cellspacing="0"><tbody><tr><td>
Just want you to know what happened when I acessed this site....Got this from NIS 2011, strange Ignored it and was ok
Regards

"Malicious Web Site Blocked

</td></tr><tr><td width="647">
You attempted to access:
http://www.razbam.org/store/catalog/...products_id=79

This is a known malicious web site. It is recommended that you do NOT visit this site. The detailed report explains the security risks on this site.

For your protection, this web site has been blocked. Visit Symantec to learn more about phishing and internet security. "

</td></tr></tbody></table>

This has remained since we were attacked by hackers.
We are trying to get symantec to clean our record.