Yesterday I did a session where I did many touch and goes in the DC-3 to explore techniques to have uneventful landings in the aircraft. With tail wheel lock on and no crosswind I found doing the brake dance on rollout to not be a problem.
As with many aircraft in MSFS when you have a crosswind that's when the fun begins.
The manual for the real C-47 suggests a wheel landing in a crosswind and after trying all 3 techniques I found that to be true.
The real trouble for me begins when transitioning from rolling out on the main wheels to when the tail wheel touches down.
It is hard to keep the aircraft perfectly strait when rolling out in a crosswind, and when that tail wheel touches down where ever the nose is pointed is where the tail wheel lock is going to want to send you. At this point you are fighting the wind and the tail wheel lock to correct your heading.
I have found some success with leaving the tail wheel lock off for crosswind landings.
I also found that approaching the rollout like you did int the A2A T-6 helps a lot. Getting on heading corrections early with many taps of the brake and moderate rudder jabs is way more effective than waiting to make dramatic inputs later.
I love an aircraft that makes you pay attention to technique and I love this add on, it has exceeded my expectations to a large degree. I would love it if a C-46 could be done to the same quality level. Anyway just food for thought JB
@c525b
See official FAA certificate: http://www.douglasdc3.com/faa/a-669.pdf
Last edited by mgr; December 14th, 2022 at 10:50.
I think the best source is the real manual. About the Vne etc the engine doesn't have that much to do with it because it's all about the structure of the airframe and its capabilities. This part is always the same, although there may be differences between versions, but certainly not as much as 100 kts, e.g. It would probably be worth looking at the detailed real photos of the gauges depending on the version and engine, plus check this information with the manual. I haven't dug that deep to check it honestly in this model.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Joe - in a real 3, you would never land with the TW lock off, crosswind or not. Your feet should and WILL be very busy, and make sure she's straight when that TW comes down. Watch the end of the runway ahead of you and correct for ANY wandering immediately. A 3 and an 18 are both a hand full in crosswinds. You can also play with differential power as well - higher power on the upwind engine, but it takes practice.
Don BP
On and Off, yessir !
The latest Duckworks mod makes it easy to have Tailwheel Lock On. Before i also tried without tailwheel lock to have more control over keeping it on the runway during landing. No problemo anymore, do it the right way now easy peasy !
Thanks much again and again, Barry !!
You have no idea how happy you've made this simple flightsimmer by bringing back his ever loving DC-3 in MSFS. And that's even without the special DC-3 Bravo TQ throttle, prop and mixture levers he's waiting on with bated breath !!
No mods except the one that adds the amphibious model
Personally, I don't use it either, I'm of the opinion that the model should be so good that no mods are needed. Keep an eye out for any problems (report it!) and just wait for a patch. Mods sometimes improve something, but they also break other things, and in the case of updates, they usually stop working.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Windows 11 23H2 Enterprise Edition
Intel i9 13900KF @ 5.8 GHz
be quiet! Dark Rock 4 Pro cooler
G-Skill 32Gb DDR5 RAM 7600-36
MSI Z790 Motherboard
Nvidia RTX4090 Graphics Card
Samsung 1TB 980 EVO PCIe M.2 C: drive
Samsung 2TB 980 EVO PCIe M.2 Data drive
be quiet! Straight Power CM1000W PSU
Btw. Found in the net https://dakotasim.com/ for DC-3 lovers.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Does anyone use this plane with both the GotFriends 40th Anniversary Expansion Pack and the Duckworks mod at the same time?
I like the GotFriends for the different variants of the Beaver and DC-3 that it adds, but it includes flight model tweaks for the DC-3, which I'm worried may conflict with the Duckworks. But the Duckworks is a more comprehensive flight model mod and I would prefer to use them together if the Duckworks flight model overrode that of the GotFriends.
August
It was my understanding that the GotFriends add on is an expansion not a mod. It does not modify the flight dynamics.
I believe they changed the default behavior to simulate the increased drag with the floats on the float plane for example but the original aircraft are unchanged.
That was my understanding anyway.
I have no doubt that this was a good business move that will pay off in the long run. I think it is the best Airplane Heaven add on I have had and I will look at them in a different light with new releases.
I am sure work has begun on a C-46 since I suggested it earlier in the thread, I have begun trips to the blood bank as often as the overly cautious minimum interval rules will allow so that I will have saved up for it.
hi all, could have sworn id seen this talked about,but for the life of me,i cant find it. but when i put the DC-3 in the hanger, each one have a checker board look,with silver lines in areas, i dont have a screen shot of it, can work on it tomorrow. but anyone know what i mean? i havent loaded it for a flight as yet. but i was disappointed to see how it looks in the hanger.i dont have the issue with any other planes but the DC-3/C-47
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Good to know !
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Btw. I have only one modification, because the model does not close the flaps and always flies with 5 degrees open, so I use this:
[FLAPS_LEVELS]
flaps_level_1 =0
flaps_level_2 =5
flaps_level_3 =10
flaps_level_4 =15
flaps_level_5 =20
flaps_level_6 =25
flaps_level_7 =30
flaps_level_8 =35
flaps_level_9 =40
flaps_level_10 =45
more info: https://forums.flightsimulator.com/t...tracted/561169 .
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
talk about coincidence, look what just emerged from my paint shed:
BB (0001) by JanKees Blom, on Flickr
BB (0003) by JanKees Blom, on Flickr
BB (0006) by JanKees Blom, on Flickr
BB (0011) by JanKees Blom, on Flickr
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Bookmarks