Aircraft compatibility in Prepar3D V4
Results 1 to 25 of 380

Thread: Aircraft compatibility in Prepar3D V4

Hybrid View

  1. #1
    Quote Originally Posted by Penz View Post
    Thank you for your effort migrating stuff! I'm not entirely sure, though, that you have tested compatibility thoroughly enough.


    The above is just an example I picked because I own that particular aircraft myself.

    Are you saying that all of a sudden the cockpit sound module "ASC.DLL", located in the panel folders, has turned 64-bit, as if by magic?

    It may not crash the sim, but "works flawless" may be slightly exaggerated, just saying.

    This thread is about sharing information, not about being 100% right.

    I re-checked the Catalina and found that some of the cockpit sounds (opening the window, klick sounds of the switches...) are missing, that's all. The engines and other sounds work.

    I would like to invite you to do some thorough testing on the Catalina and enlighten us on everything else that does not work because of the ASC.dll!


    Cheers,
    Mark
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  2. #2
    Quote Originally Posted by roger-wilco-66 View Post
    ...
    I would like to invite you to do some thorough testing on the Catalina and enlighten us on everything else that does not work because of the ASC.dll!
    ...
    Actually, if you downloaded the reworked Twotter (v1.21) from Aerosoft you get a working 64bit ASC.dll.

    Also, the Catalina can officially be downloaded from Aerosoft as P3Dv4 version (v1.22), as well.
    P3D v4.5, DCS, AF2
    W10 64bit Pro
    Core i7 6770K @ 4,3 GHz
    32 GB DDR4 2666
    RTX 2080 Super 8 GB
    Oculus Rift S
    Cable 1000 Mbit/s

  3. #3
    Quote Originally Posted by vora View Post
    Actually, if you downloaded the reworked Twotter (v1.21) from Aerosoft you get a working 64bit ASC.dll.

    Also, the Catalina can officially be downloaded from Aerosoft as P3Dv4 version (v1.22), as well.
    Now that was useful, thanks. Downloaded v1.22 and all is fine.

    [edit: updated list]

    Cheers,
    Mark
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  4. #4
    Member IanHenry's Avatar
    Join Date
    Jun 2007
    Location
    United Kingdom
    Age
    65
    Posts
    1,610
    Blog Entries
    1
    Thanks for all your work Mark.
    There are open Betas available form HiFi Simulations for both Active Sky and active Sky Cloud Art, both products that I was missing in v4.0

    https://hifisimtech.com/forums/showt...-now-available


    Ian

  5. #5
    SOH Staff .."Bartender" AussieMan's Avatar
    Join Date
    Jun 2005
    Location
    Woy Woy, NSW, Australia Zulu +11 AEDST
    Age
    77
    Posts
    3,593
    Quote Originally Posted by IanHenry View Post
    Thanks for all your work Mark.
    There are open Betas available form HiFi Simulations for both Active Sky and active Sky Cloud Art, both products that I was missing in v4.0

    https://hifisimtech.com/forums/showt...-now-available


    Ian
    I visited the HiFi site and saw that the V4 open beta are available only to people who have a valid registration key for AS 2016 for P3D V3. Once you get it set up you can add FSX-SE, P3D V3 and P3D V4. Works fine and I have it set up to the way I want it.


    Cheers
    Pat


    "Some people might say that freedom is being alone in the bush with the only sounds being the murmurs from the birds ... but I believe freedom is at 5000 feet with no other sound than the engine roaring."- William Hutchison, a young man taken from us far too young (16).

  6. #6
    Quote Originally Posted by roger-wilco-66 View Post
    I would like to invite you to do some thorough testing on the Catalina and enlighten us on everything else that does not work because of the ASC.dll!

    Cheers,
    Mark
    I was just trying to be helpful. I can assure you I won't make any further comments.

    - JP
    - Jens Peter "Penz" Pedersen

  7. #7
    Most usefull this thread, thanks.

    Milviz F-86 working good.

    Just Flight Mosquito, you know it's there you can hear the plane, but it's invisible.
    Just Flight F4U-1 just the outer part of wings is visible.
    Of course I´m not complaining, bought them for v3...
    Regards
    Attached Thumbnails Attached Thumbnails 2017-5-31_18-31-31-972.jpg  

  8. #8
    Coastie Dolphins/Spartans CG_1976's Avatar
    Join Date
    Jun 2007
    Location
    JBSA/Corpus TX
    Age
    47
    Posts
    3,512
    The Iris C27J MLU is working very happy in P3DV4. Been logging lots of Hours in her on FSE.

    AMD FX 8-Core Black 4.2Ghz, 8G Ram 2TB HD, W8.1 pending W10, ATI R5 2G X2 Crossfire
    http://www.canadianarcticfse.com/

  9. #9
    SOH-CM-2023
    Join Date
    Jun 2005
    Location
    Netherlands
    Age
    65
    Posts
    1,232
    Blog Entries
    1
    Beaufighter, I am truly sorry for you, but in a way it is balm to my soul! Why? Because I had the problem of the invisible Mosquito with P3Dv3, I seemed to be the only one, and despite vast efforts, JF could not cure it. I hope that now that you seem to have the same or a similar problem, a cure may be found. Incidentally, you could try whether the demo of the Mosquito works. With me it did in P3Dv3.
    Best regards,
    Stickshaker


  10. #10
    Hi Stickshaker, better luck than you....works perfectly here, in P3D v3.4 Let´s hope they´ll find a cure. Anyway bought it for v3, no reason to complaints and always able to use it since I kept v3. Invisible Mosquito was a secret weapon, now they are trying stealth planes. Britain suceed where America failed with Corsair Birdcage still showing outer wing panels....
    Best regards

  11. #11
    For the record, the Birdcage Corsair shows the same phenomena on my system. This might be linked to a .gau and .dll problem, since both are present in the panel folder.

    Cheers,
    Mark
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  12. #12
    Quote Originally Posted by roger-wilco-66 View Post
    For the record, the Birdcage Corsair shows the same phenomena on my system. This might be linked to a .gau and .dll problem, since both are present in the panel folder.

    Cheers,
    Mark
    I think invisible Justflight planes will be their copy protection, it's also how they do their demo's which go invisible after a while. 32bit code to be replaced...hopefully same code for all planes
    Other invisibles will be FS9 elements in the model - the Virtavia Caribou sadly is missing doors, wheels etc. And breaks the P3D menu system too so a restart is needed.

    The Virtavia/Flight 1 Islander works well, except the GPS which is a 32bit GAU and sadly part of the cockpit 3D model. Also the scuttle no longer shakes on engine run-up
    The Razbam Metroliner also mostly works, just flashing power light and defunct fuel gauges and load manager.
    VirtualCol Otter works OK.

    If you have either the Aerosoft Twin Otter or Catalina you get a new 64bt asc.dll in the new install - could maybe be used for any other Aerosoft plane not currently ported?

    Cheers
    Keith

  13. #13
    SOH-CM-2023
    Join Date
    Jun 2005
    Location
    Netherlands
    Age
    65
    Posts
    1,232
    Blog Entries
    1
    Hello Beaufighter, did I misunderstand ypour post? What problem did you have with the Mosquito?

  14. #14
    I think he's having texture problems, so it looks like he "sitting on air". Or like Wonder Woman's jet. Not seeing any of the plane.
    I think is what he means.
    I've been wrong before, though. Many, many times. I won't go so far as "usually" but...

    Pat☺
    Fly Free, always!
    Sgt of Marines
    USMC, 10 years proud service.
    Inactive now...

  15. #15
    How would a statement such as "Are you saying that all of a sudden the cockpit sound module "ASC.DLL", located in the panel folders, has turned 64-bit, as if by magic?" be taken as being helpful, constructive criticism? It may have not been intentional, but it appears to be sarcastic and mean spirited.

    Quote Originally Posted by Penz View Post
    I was just trying to be helpful. I can assure you I won't make any further comments.

    - JP

  16. #16
    whats needed to make the carenado planes work? i installed them fine into the sim with the installers just wont work i think they are missing some activation.dll that gets installed into The sim how where has anyone found where it is hidden
    Thursday, November 27 2014 I Lost My Best Friend My Uncle! He Was Amazing person He was a volunteer For Las Vegas metro Police he will be missed, I Volunteer with him Many Times With LVMPD And USFS


    THOMAS CURTIS
    Thursday Nov 27th 2014

    ==Punisher of Arizona == Thin Blue Line

  17. #17
    Quote Originally Posted by Cirrus N210MS View Post
    whats needed to make the carenado planes work? i installed them fine into the sim with the installers just wont work i think they are missing some activation.dll that gets installed into The sim how where has anyone found where it is hidden
    this the dll files used in the gauges and the copyright protection that dont work, nothing you can do until they re release it in v4 format

    unless you have the sources data for the gauges and convert them to xml

  18. #18
    Quote Originally Posted by awstub View Post
    How would a statement such as "Are you saying that all of a sudden the cockpit sound module "ASC.DLL", located in the panel folders, has turned 64-bit, as if by magic?" be taken as being helpful, constructive criticism? It may have not been intentional, but it appears to be sarcastic and mean spirited.
    I'm not a mean spirited person at all, and I can see what you mean. I can assure you that my comment was only meant to be humorous, but alas humour doesn't always translate well in writing, and is somewhat context sensitive.

    My sincere apologies if I offended anyone.

    - JP
    - Jens Peter "Penz" Pedersen

  19. #19
    Quote Originally Posted by Penz View Post
    I'm not a mean spirited person at all, and I can see what you mean. I can assure you that my comment was only meant to be humorous, but alas humour doesn't always translate well in writing, and is somewhat context sensitive.

    My sincere apologies if I offended anyone.

    - JP
    Really, no need for this...quite sure you didn´t offend anyone...this is of no importance at all, we are hre to learn one from another.

  20. #20
    SOH-CM-2022 Crusader's Avatar
    Join Date
    Jun 2005
    Location
    New Lexington , Ohio
    Age
    76
    Posts
    1,521
    One of my favorites , the Alabeo D17 Staggerwing has some interior cockpit texture problems . I'm sure it will all be moved in the the right direction as the developers update their products to v4 compatibility . I emptied my shader cache folder thinking it might have something to do with it but it made no difference .

    Rich
    Attached Thumbnails Attached Thumbnails 2017-6-6_6-47-13-599.jpg  

  21. #21
    Quote Originally Posted by Crusader View Post
    One of my favorites , the Alabeo D17 Staggerwing has some interior cockpit texture problems . I'm sure it will all be moved in the the right direction as the developers update their products to v4 compatibility . I emptied my shader cache folder thinking it might have something to do with it but it made no difference .

    Rich
    no its the "CMeteoXml.dll" and "Carenavigraph.dll" the first file is required for the copyright protection, its plaguing all the mid to late Carenado releases as well, the second one is the FMS for those models that have one thats is also causing some problems

    If you have any early releases by Carenedo they will work like the Arrow as they dont require this file but the more recent ones will fail

    I remember correctly all of the Alabeo aircraft where released after Carenado introduced this file, so they all will have that problem

Members who have read this thread: 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •